ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with DL380 G3 and IBM-Drives

Braig
Occasional Visitor

Problem with DL380 G3 and IBM-Drives

Hi

To replace a defektive HD i've bouaght a IBM-Drive Type ST373405LC.
This drive works in our IBM but not in our Proliant DL380 G3.
The server does not even find this drive.
Is ther a possibility to get it to work?
Where can I Get in a menu on this machine that allows me a lowlevelformat of this drive?

regards H.Braig
2 REPLIES
Michael Richter
Trusted Contributor

Re: Problem with DL380 G3 and IBM-Drives

i don't recommend to use an IBM instead of the org. HP Disks. Cause the Firmware is not HP confirm and so u might run into worse issues!
Further Drive monitoring won't work correctly and the HP Agent may send incorrect ErrorMsg.

At least u'll loose your SupportGuarantee until u built a supported environment!

Nobody will pay, if your Array crashes and your datas gone

rg,mike
Oleg Koroz
Honored Contributor

Re: Problem with DL380 G3 and IBM-Drives

There is no LLF utility. Erase utility from Smart Start CD only one, however I seen only Fujitsu or Quantum(Maxtor) HDD that can be detected, but you might run into other problems with performance or Read/Write Errors, timeouts, monitoring, disk size for mirroring ... etc.