ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with Dawicontrol DC100

 
Pucher
Occasional Visitor

Problem with Dawicontrol DC100

Proliant ML110G3 cant boot with dawicontrol DC100 what I can do?
or
which PCI IDE Raid card can I use?
6 REPLIES
raadek
Honored Contributor

Re: Problem with Dawicontrol DC100

With ProLiant servers you are limited to supported options only (in most cases).

Have a look at this:
http://h18004.www1.hp.com/products/quickspecs/12527_div/12527_div.HTML#Options
Storage Controllers

The only one 'allowed' is:
HP 8 Internal Port SAS Host Bus Adapter with RAID 347786-B21

Rgds
Don't panic! [THGTTG]
Michael Richter
Trusted Contributor

Re: Problem with Dawicontrol DC100

u can use the following Controllers:

366651-001 ML100 SCSI RAID Controller
355671-B21 HP 6-Port SATA RAID Controller

have also a look at the qucikspecs for further optinal devices

WorldWide QuickSpecs - HP ProLiant ML110 G3
http://h18000.www1.hp.com/products/quickspecs/12308_div/12308_div.HTML



Pucher
Occasional Visitor

Re: Problem with Dawicontrol DC100

thanks for replay

366651-001 ML100 SCSI RAID Controller
355671-B21 HP 6-Port SATA RAID Controller
is SATA !!
but i have to use the disks (4xIDE 500GB) from my old server !

is there any way or any controller card (IDE)?!?

raadek
Honored Contributor

Re: Problem with Dawicontrol DC100

It is very unlikely you can do that.

1) the controller has to be compatibile with the server (i.e. be listed on supported option list)
2) disks have to be compatibile with the controller

Rgds
Don't panic! [THGTTG]
Pucher
Occasional Visitor

Re: Problem with Dawicontrol DC100

thanks raadek

i think i found an controller card that works
tekram TX2000 it supports 33/66 PCi !
raadek
Honored Contributor

Re: Problem with Dawicontrol DC100

Bear in mind that 'hard' compatibility (e.g. PCI slot comatibility) does not guarantee you that a part which is not listed as 'supported' will work in your server.
Don't panic! [THGTTG]