HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with HP Embedded SATA on ML 150G3

 
Roger Wee
Occasional Visitor

Problem with HP Embedded SATA on ML 150G3

Does anyone know about this issue? Please share some lights...

I'm trying to install WinServer 2003 SBS on a ML 150G3 with 2 x 160GB SATA drives using the HP embedded SATA (to configure RAID 1)

During the setup, the system allows me to add in the additional driver (Adaptec SATA driver for Windows 2000/XP/2003) via a usb drive, however after creating the intended partition and contiune into the setup the system asked to insert the driver in floppy drive A:,setup don't seems to be able to read from the usb floppy drive! and I can not contiune to install windows anymore.

I've done almost every thing that I can think of but don't seems to get any where.
Change a few different USB floppy drive..
flash the bios to the latest.

Thanks in advance and best regards.



6 REPLIES
ramesh_naik_
Esteemed Contributor

Re: Problem with HP Embedded SATA on ML 150G3

Hi Roger,

This should help you..

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1052883

Also try this:

1. From system bios setup ( F10 ) enable legacy USB support & then try to connect the USB drive from both front & rear USB ports

2. Repeat above step with legacy USB support disabled.


Hope this works!!!

Regards,
rmn



ramesh_naik_
Esteemed Contributor

Re: Problem with HP Embedded SATA on ML 150G3

Roger,

You may want to check this as well...

https://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1062339

Regards,
rmn
Roger Wee
Occasional Visitor

Re: Problem with HP Embedded SATA on ML 150G3

Thank you Ramesh for replying,

I have the bios flash to the latest, Build 08/29/2006, however it didn't work. And there is no such setting as you had mention.

you will only have limited option when you press F10 and go to >Advanced > USB Configuration USB Controller and
USB 2.0 Controller

the problem is it detected the USB floppy and loads the driver into the memory just one time and will not read from the floppy again when windows asked for the driver in drive A:

I may have to work on your second suggestion.
will update if this works.

Cheers

chongkan
Trusted Contributor

Re: Problem with HP Embedded SATA on ML 150G3

Yes SR we know!!

Here is a link with all posible answers:

Before going there I think that the most cheap, trustable and practical in all purpose is by making an slipstream CD ( Embedding the drivers in the WIN-OS CD )

Http://www.nliteos.com <- Freeware!

http://www4.itrc.hp.com/service/james/search.do?todo=search&searchtext=ml150+g3+and+sata&from=forums&origin=0&wpa=forums1.itrc.hp.com%3A80&searchcategory=ALL&hpl=1&searchcriteria=allwords&rn=25&source=7000&presort=rank&chkServStor=on&esc=europe.support.itrc.hp.com&admit=-938907319+1159243059736+28353475

Problem Solved + WIN-OS CD Backup with drivers inlcuded = 2 birds in 1 shot
Stussy
Advisor

Re: Problem with HP Embedded SATA on ML 150G3

I have had the same problem but with the ml110.

Solution1: Connect an internal diskette station (fdd), possible problem: there is't a connector for fdd

Solution2: Try to get your hands on a usb floppy drive from HP or Toshiba(only some versions works)

Solution3: Create an unattended setup with your raid drivers slipstreamed (more info:http://unattended.msfn.org/unattended.xp/view/web/36/ )

Greetz
ramesh_naik_
Esteemed Contributor

Re: Problem with HP Embedded SATA on ML 150G3

Hi Roger,

Stussy is right on this. The detailed info is posted in my previous post regarding the forum:

https://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1062339


Worth giving a try!!!!!

Regards,
rmn