HPE Community
ProLiant Servers (ML,DL,SL)
1753846 Members
8084 Online
108807 Solutions
New Discussion

Problem with NT 4.0, Proliant 5500 and Intel PRO/1000 T NIC

 
Andrew Kwiecien
Occasional Advisor

‎01-05-2004 02:23 AM

‎01-05-2004 02:23 AM

Problem with NT 4.0, Proliant 5500 and Intel PRO/1000 T NIC

I'm hoping that someone might have some insight on the problem I ran into. For some reason I'm unable to get true Gbit speed out of Intel PRO/1000 T NIC when installed on Proliant 5500 running NT 4.0. We use WS-X6316-GE-TX Cisco blade that works well with other devices. Speed (determined via some crude tests) is that of 100\F connection. Any suggestions would be appreciated.
0 Kudos
Reply
1 REPLY 1
Roger Faucher
Honored Contributor

‎01-05-2004 05:33 AM

‎01-05-2004 05:33 AM

Re: Problem with NT 4.0, Proliant 5500 and Intel PRO/1000 T NIC

Andrew:

You could try a newer (less than 30 days old) driver from Intel:
http://downloadfinder.intel.com/scripts-df/filter_results.asp?strOSs=24&strTypes=PLU%2CDRV%2CUTL&ProductID=845&OSFullName=Windows+NT*+4.0&submit=Go%21

HTH

Roger
Make a great day!

Roger
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.