ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with Proliant DL380 G3 - disk, scsi backplane or what

Tebsvk
Occasional Visitor

Problem with Proliant DL380 G3 - disk, scsi backplane or what

Hello.

We have an old Proliant DL380 G3, but worked OK until now. One day amber light lit on hard disk at bay 1, we changed it by a new disk, but amber light remained.

Then we changed the SCSI backplane board, got from another server, but the same error  appeared: disk at bay 1 failed.

Now don't know where to go further.

We have following configuration: disks 1,2 on internal 5i raid controller and disks 3,4,5,6 on additional 641 raid controller (i.e. "duplex").  I tried to connect disks 1,2 to another one 641 controller, but "SCSI configuration error" led lit on the SCSI backplane board.