Problem with RAID 6 on ML350G5

[Filhronos]

Hi, all

i have problem with 1 disk in Raid :

The Physical drive at Port 1I : Box 1 : Bay 6 is reporting S.M.A.R.T. errors.
# 778 The current array controller is rebuilding logical drive 1 ( RAID 6 (ADG) ).

Configuration changes to this logical drive or any other logical drive in array A are not allowed until rebuilding is complete. Also, configuration changes to any other array that is waiting for expansion or rebuild are not possible until this process completes. If unused space exists, additional logical drives can be created. Otherwise, most configuration changes are not allowed until this process is complete. 

[ Top ]  →  [ Smart Array P400 in slot 1 ]  →  [ SAS Array A ]  → Device Error Report Device Status Logical Drive 1   The array controller is rebuilding this logical drive

[ Top ]  →  [ Smart Array P400 in slot 1 ]  →  [ SAS Array A ]  →  Logical Drive 1 Report Section(s): Logical Drive Identification
Logical Drive Configuration
Logical Drive Status
Surface Status
Volume Profile Data Total
Vpd Page 80
Vpd Page 83 [ Top ]  →  [ Smart Array P400 in slot 1 ]  →  [ SAS Array A ]  →  [ Logical Drive 1 ]  → Device Error Report Device Status Logical Drive 1   The array controller is rebuilding this logical drive [ Top ]  →  [ Smart Array P400 in slot 1 ]  →  [ SAS Array A ]  →  [ Logical Drive 1 ]  → Logical Drive Identification Block Size 512 Bytes Per Block  (0x0200) Blocks On Volume 0x4459c930 Drive Param Table Max Cylinders Max Heads Translation Signature Phys Sectors Per Track Pre Comp Cylinder Max ECC Burst Drive Control Max Physical Cylinders Max Physical Heads Landing Zone Sectors Per Track Checksum 0xffff 0xff 0x00 0x00 0x0000 0x00 0x00 0x0000 0x00 0x0000 0x20 0x00 Fault Tolerance Mode 6  (0x05) BIOS Disable Flag Boot Support Status Enabled Informational Volume Identifier 0x00000000 Volume Label A010066CPAFGK0P9VWO6P5EE64 Big Blocks In Logical Drive 0x000000004459c930 Page 83 Identifier

 Please give me  a support for this theme.

[PGTRI]

hi,

Can you please attach an ACU report?

Thanks

regards,