HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with SNMP OID cpqDaPhyDrvFailureCode.1.6

 
mvarre
Occasional Collector

Problem with SNMP OID cpqDaPhyDrvFailureCode.1.6

Received two alerts from my monitoring software that shows the following:

 

Generic SNMP Test (1.3.6.1.4.1.232.3.2.5.1.1.55.1.7) [Physical Drive Failure Code (7)] - Integer 20

Generic SNMP Test (1.3.6.1.4.1.232.3.2.5.1.1.55.1.6) [Physical Drive Failure Code (6)] - Integer 5

 

I have walked the MIB and they are in fact those values. From what i can tell those arent listed as failure codes for this, and the IML as well as the HP Management Homepage don't show failures.  Exact same server shows values of 0 for these these OIDs so i can't figure out if there really is a problem here.

 

Any thoughts?  Thanks

1 REPLY
jmquesadarivel
Frequent Advisor

Re: Problem with SNMP OID cpqDaPhyDrvFailureCode.1.6

update Controller firmware, driver and agents. If ACU/ADU show everything fine it should a fake alert.