ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with Scalable UPS Card and R6000

Problem with Scalable UPS Card and R6000

Hello everybody! I have two UPS model R6000 (one HP and one Compaq)and I was using LanSafe to manage them separately. Recently, Iâ ve bought HPâ s Scalable UPS Card in order to manage the two UPS as one unit, but I have problems installing itâ ¦

Iâ ve done all the necessary connections:
1.UPS1 port of Scalable Card is connected to my first UPS
2.UPS2 port of Scalable Card is connected to my second UPS
3.CPU port is connected to a serial port of my ML370 Proliant server (Windows 2003)

From a white paper, I found out that in order to use the scalable card my UPS must have the following characteristics:
1.Control board firmware at a minimum code REV of 2.00
2.Communications board at a minimum code of 1.00d
3.Scalable options board at a minimum code of REV 006
So, I upgrade my two UPS and now HP UPS has REV 2.00 and 1.04 and Compaq UPS has REV 2.00 and 1.01.

Iâ ve installed â Insight Managerâ and â HP Rack and Power Managerâ but server doesnâ t seem to communicate with the scalable