Problem with hpacuscripting.exe and a dl380g7

[Nathan Whitaker]

Can someone please explain to me why this doesn't work. I think I'm missing something obvious.

; Date captured: Wed Oct 27 11:19:13 2010
; Version: 8.60.8.0

Action= Configure
Method= Custom


; Controller Specifications
; Controller HP Smart Array P410i, Firmware Version 3.00, License Keys Supported
; SerialNumber 5001438009B82F70
Controller= SLOT 0
ReadCache= 25
WriteCache= 75
RebuildPriority= Medium
ExpandPriority= Medium
SurfaceScanMode= Idle
SurfaceScanDelay= 3
DriveWriteCache= Disabled
NoBatteryWriteCache= Disabled
; Unassigned Drives
; 1I:1:1 (146 GB), 1I:1:2 (146 GB), 1I:1:3 (146 GB), 1I:1:4 (146 GB)

; Array Specifications
Array= A
; Array Drive Type is SAS
; 1I:1:1 (146 GB), 1I:1:2 (146 GB)
Drive= 1I:1:1, 1I:1:2
OnlineSpare= No

; Logical Drive Specifications
LogicalDrive= 1
RAID= 1
Size= MAX
Sectors= 32
StripeSize= 128
ArrayAccelerator= Enabled

[Nathan Whitaker]

The config works as long as I specify the size. If I set it to Max the error is 2843 invalid size.

[tbone72]

This is a known issue with the 8.60 version of hpacuscripting. It will be fixed in the next version(8.70). To work around this issue, just remove the line "Size=MAX" from your file. This will default the size to MAX.

[Nathan Whitaker]

Took ou the Size= line. Didn't work.