HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem

 
Sujeewa
Occasional Visitor

Problem

During POST of my server, the following message is displaying..

 

BMC Responding

L01- Unsupport memory population

610 - BMC SEL is full

Press F1 to continue

 

I want to know what is this trouble and how to solve it....

3 REPLIES

Re: Unsupported memory population

>L01- Unsupport memory population

 

It looks like it doesn't like your DIMM layout.

Blackie21
Advisor

Re: Problem

Hello Sujeewa,

 

you can review SEL log in BIOS or using SmartStart CD (maintenance / hp insight diagnostics / log tab). You can also clear this log there.

 

As Dennis mentioned it seems as memory population issue. Please check your memory configuration and if possible try to reseat all memory modules. If problem persist please share with us advanced system survey using SmartStart CD - HP Insight Diagnostics to verify memory population and firmware details.

 

Thank you!

 

Blackie21

 

- I am HP employee

- If you found this answer helpfull please click the KUDOS - thumb below!

 

 

raanangol
Advisor

Re: Problem

  1. Boot the server and press the F10 key when prompted to run BIOS Setup.
  2. Select the Advanced menu.
  3. Scroll down to IPMI and press the ENTER key.
  4. Scroll down to the System Event Log and press the ENTER key.
  5. At the Clear System Event Log selection, press the ENTER key to toggle between Enable and Disable .
  6. Select Enable .
  7. Press the F10 key to save the changes and exit the BIOS Setup