ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problems disabling the embedded Graphics card on a DL380

 
Ben Mason_1
Occasional Visitor

Problems disabling the embedded Graphics card on a DL380

I'm installing an NVIDIA GeForce 2MX graphics card in a DL380 and would like to disable the embedded ATI rage IIC card. I have disabled it using the internal switch, but when I try to disable it in the bios (using the Compaq System Configuration Utility V2.58A), it gives me a message along the lines of ' Unable to change setting. Correct setting is automatically detected by the utility'. Any suggestions of why this may be would be greatly appreciated.

Thanks,

Ben
1 REPLY
Ian Matthews_2
Valued Contributor

Re: Problems disabling the embedded Graphics card on a DL380

as long as it is disabled via switch 1 on the bank of six switches you should be ok - once you've disabled it run system config and save changes

hope this helps (only normally disable graphics when installing rib board)

Ian