ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problems with Hdisks and UID button

 
ismael.estrada
Occasional Contributor

Problems with Hdisks and UID button

I have a proliant DL380 G6. My problem is:
The leds of the Hard Disks (array 4 disks, in a type 5) are in blue color, i press the button UID for change to color green, and no change. How can resolve?.
The server are working fine, but in the future...im thinking how identificate a Hard Disk. I used the HP instant Manager and no resolve.
5 REPLIES
ess
Super Advisor

Re: Problems with Hdisks and UID button

Hi
please check the status H.D.D in ACU on the os and send my report .
tanks.
ismael.estrada
Occasional Contributor

Re: Problems with Hdisks and UID button

All the status are Ok.

Re: Problems with Hdisks and UID button

Hi!

All the HDD's LEDs are blue and they blink at the same time since the server power up?
Are they SAS HDDs? Is there any lower on the server's performance? What OS are you using?
"ITS NOT ABOUT HOW HARD YOU CAN PUNCH, ITS ABOUT HOW HARD YOU CAN TAKE A PUNCH AND KEEP MOVIN' FORWARD!!!"
ismael.estrada
Occasional Contributor

Re: Problems with Hdisks and UID button

It's right all the HDD's LEDs are blue and they blink at the same time since the server power up. Don't have problem in performance.
I'm using HDDs SAS Model HP EF0300FATFD
The OS is Windows 2003 server X64

TTr
Honored Contributor

Re: Problems with Hdisks and UID button

> i press the button UID for change to color green

The UID button is for the server front and back lights not for the disks.

You change the UID of the disks in ACU. Run ACU and select each disk and change the ID status.