HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problems with NC510C 10 Gbit teaming with Proliant DL350G5 and Windows2003

 
Oleg Shirnin
Occasional Visitor

Problems with NC510C 10 Gbit teaming with Proliant DL350G5 and Windows2003

Hello!

The problem is that I cann't team two 10Gbit NICs http://h18004.www1.hp.com/products/servers/networking/nc510c/questionsanswers.html?jumpid=reg_R1002_USEN with HP Network Configuration Utility tool. Two integrated 1Gbit NICs teaming is fine. The utility says, that teaming for this adapter types is unsupported as http://h18004.www1.hp.com/products/servers/networking/nc510c/questionsanswers.html?jumpid=reg_R1002_USEN#b2 says too. This is very strange for me. When purchased 12 10Gbit for 6 Proliant servers and some ProCurve stuff nobody can expent, that we couldn't team them.

My environment is:
1. HP Proliant DL360G5 server (CZJ823A21W serial)
2. 2 x HP NC510C PCIe NICs
3. Windows Server 2003 Enterprise Edition
4. HP Network CU (March 2008)

Downloaded SP38273 from HP Support and upgraded NIC Flash (using nxflash.exe) from 2.3.60 to 3.4.336 version, no success in teaming.

Is there any chance to get this NICs teamed? Maybe some beta software with this option. It's absolutely important for us. Thank you a lot!
2 REPLIES
Oleg Shirnin
Occasional Visitor

Re: Problems with NC510C 10 Gbit teaming with Proliant DL350G5 and Windows2003

soon need any suggestions...
Lmm_1
Honored Contributor

Re: Problems with NC510C 10 Gbit teaming with Proliant DL350G5 and Windows2003

So far no, teaming is not supported for netxen nics.

rgds,
lmm