Problems with hdd on DL380 G3

[HappyAlex]

After installation System Management Homepage
i have this info

Problem Indicators
Failed Recovery Reads: 0
SCSI Bus Faults: 27
Other Timeouts: 19
IRQ Deglitch: N/A

Failure Indicators
Spinup Errors: 2 Aborted Commands: 0
Realloc Aborts: N/A
Media Failures: 0
Format Errors: 0
Hardware Errors: 0
Not Ready Errors: 476
Bad Target Errors: 0
Fail Recov Writes: 0
Self Test Errors: N/A

another one
Problem Indicators
Failed Recovery Reads: 0
SCSI Bus Faults: 37
Other Timeouts: 135
IRQ Deglitch: N/A

Failure Indicators
Spinup Errors: 5
Aborted Commands: 0
Realloc Aborts: N/A
Media Failures: 0
Format Errors: 0
Hardware Errors: 0
Not Ready Errors: 605
Bad Target Errors: 0
Fail Recov Writes: 7
Self Test Errors: N/A

Sectors Read: 11782927361
Sectors Written: 7220804266
Hard Read Errors: 5
Hard Write Errors: 0
Recov Read Errors: 0
Recov Write Errors: 0
Total Seeks: 0
Hot Plug Count: 3
Seek Errors: 0
DRQ Timeouts: N/A

3 hdd
Problem Indicators
Failed Recovery Reads: 0
SCSI Bus Faults: 65
Other Timeouts: 305
IRQ Deglitch: N/A

Failure Indicators
Spinup Errors: 2
Aborted Commands: 0
Realloc Aborts: N/A
Media Failures: 0
Format Errors: 0
Hardware Errors: 0
Not Ready Errors: 1763
Bad Target Errors: 0
Fail Recov Writes: 0
Self Test Errors: N/A

Statistics
Sectors Read: 10327989504
Sectors Written: 2508026759
Hard Read Errors: 0
Hard Write Errors: 0
Recov Read Errors: 0
Recov Write Errors: 0
Total Seeks: 0
Hot Plug Count: 0
Seek Errors: 0
DRQ Timeouts: N/A


any suggestions ?
Thx

[KarloChacon · Accepted solution]

just to be sure

have you tried another HDD so i see too much timeouts oh that information

I could say the controller is having problems

just to be sure again

do have install the Array Diagnostic Utility?
http://h18007.www1.hp.com/support/files/server/us/download/26995.html

this will create a report about the HDD and controller you will see what's happening

like I told you if you warranty, you can send this report to hp they will tell you what you have to do

i don't know if you can pay if you are out-warranty


another tool hat will help is the HP insights diagnostic which comes with the System management home page so you're telling you having, use Diagnosis Tab and Integrated Management Log to see the errors

regards

see the attached files

[HappyAlex]

Thx for your answer
For test i do one thing
I have to Raids - one is Mirror 36Gb
and second Mirror - 4 hdds
so when i try to copy from second to first Raid i got error :(

So i make one big Raid 5 with 1 disk spare...
and tried to filling it.. all space.. and it's working ok

Probably it coherently with quantity of memory in the controller

[KarloChacon]

so you're telling me everything is OK?

regards

[HappyAlex]

Still testing on Windows 2003
later will install Red Hat ES 5
and testing again
hope problem is resolved

[George Jires]

If Other Timeouts number is rising on an disk drive,then the disk drive will soon or later become failed. Localize the disk drive and replace - it was help me allways ...
George