Procedure to replace the Failed SATA Harddirve in ML110 (RAID 1)

[Jayachandran.S]

Hi,

we have Hp-Proliant ML110 which is running on Red Hat Linux 9. Two Harddrives are in Hardware RAID1.
Now one harddrive got failed.
Procedure to replace the Failed SATA Harddrive with leveling.

Thx

[Blazhev_1]

Hi,

you didn't mention which generation is the ML110... On the onboard controllers you replace the HDD, then go into the controller bios (F8 or Ctrl+A when prompted) and you declare the new drive as online spare...then the rebuild will start automatically. You can check :

http://h10032.www1.hp.com/ctg/Manual/c00474317.pdf , page 7.

Pac

[Blazhev_1]

Hi,

you didn't mention which generation is the ML110... On the onboard controllers you replace the HDD, then go into the controller bios (F8 or Ctrl+A when prompted) and you declare the new drive as online spare...then the rebuild will start automatically. You can check :

http://h10032.www1.hp.com/ctg/Manual/c00474317.pdf

Pac