Procedures for getting Serial Numbers of installed DIMMs on HP bl460c gen9 blades

[JoelTaglinao]

Hi Team,

I'm humbly asking for your asssistance on how can I get the serial numbers  of installed DIMMs on our HP bl460c gen9 blades that we will use for our assessment on our ongoing expansion for virtualization. I'm not currently familiar with HP CLI commands that need to run to get the desired output. Also, appreciate if you can give me service impact assessment considering I will run the commands on production. I tried to run linux based commands like dmidecode but the Serial Number is not specified on the output similar to below. 

[root@ggtr01-bc01s01-ems01:Active ~]# dmidecode -t 17
# dmidecode 2.12
# SMBIOS entry point at 0x788fb000
SMBIOS 2.8 present.

Handle 0x000C, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 16384 MB
Form Factor: DIMM
Set: None
Locator: PROC 1 DIMM 1
Bank Locator: Not Specified
Type: DDR4
Type Detail: Synchronous Registered (Buffered)
Speed: 2133 MHz
Manufacturer: HP
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: 752369-081
Rank: 2
Configured Clock Speed: 2133 MHz
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V

Hope you can help me on this matter. Thank you.

Best regards,

Joel

[AmRa]

Hi Joel,

Please refer another community post with similar query.

How to detect serial number of DIMMs for RHEL OS Proliant servers?

https://community.hpe.com/t5/bladesystem-server-blades/how-to-detect-serial-number-of-dimms-for-rhel-os-proliant/td-p/5300509#.X2N86WgzaUk