ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 1500 goes on strike after 4 minutes

 
Peter Curley
Occasional Visitor

Proliant 1500 goes on strike after 4 minutes

This puppy has been running fine for over a year and many before that with previous owner. Last week screen went black and no connection to network. Had to reboot everything was fine for about 2-3 minutes after boot complete then black screen and no connection. Machine is clean and is not running hot, all fans working fine. After hang all drive and machine lights remain on. I figured power supply and replaced with new one but no change. Any ideas? besides get a new server.
3 REPLIES
Terri Harris
Honored Contributor

Re: Proliant 1500 goes on strike after 4 minutes

What OS is/was running? Have you tried to clear CMOS on this server? I would also reseat all components (especially CPU & memory).

Clear CMOS: Switch # 6 on the system board (SW1)
HGN
Honored Contributor

Re: Proliant 1500 goes on strike after 4 minutes

Hi

You can try to re-seat all the cards,also the power supply connectors and check. Hope you had already checked the display unit.


Rgds

HGN
Peter Curley
Occasional Visitor

Re: Proliant 1500 goes on strike after 4 minutes

2K Server is running (fine for 4 minutes) Power supply is new. Will reseat the cards and memory although the server was not moved and sits on a solid cement base 3" above floor level so no movement. Maybe we had an earthquake and I missed it...