Proliant 1600 switch configs

[Ilja Kukuskins]

Greetings. I have a compaq proliant 1600 server with a Pentium II 350Mhz processor and I want to install two Pentium III 500Mhz processors in it. As I read through the tech specs this server supports those new processors, but I just can't find a switch configuration for them...I've been reading through the manuals and the web for a week now... Is there anyone, who can help me configure this old peace of metal?

[SPa · Accepted solution]

SW1 - Bus/Core Ratio Settings
Processor Speed
(Bus at 100 MHz) 1 2 3 4
300 ON ON OFF ON
350 ON ON OFF OFF
400 ON OFF ON ON
450 ON OFF ON OFF
500 ON OFF OFF ON

The info is available in the service manual available on the below link:

http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_179480-001_rev3_us/TPM_179480-001_rev3_us.pdf

[Ilja Kukuskins]

Thanks for the answer. I guess it will do :)

But the the link you gave seems to be dead. "The page you requested can not be found." blah blah...

Is there any way for me to lay my hands on that pdf? :)

[Ilja Kukuskins]

oops...guess I had connection problems...seems the problem is solved.

Thanks again

[Ilja Kukuskins]

-