HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 1600 upgrade

 
jeff Branfield
Occasional Visitor

Proliant 1600 upgrade

I am trying to upgrade the video card in my proliant 1600 server. I have purchased a cheap PCI card - a pine 32mb 3d phantom model SiS 315E. When I put it into a PCI slot the server will not boot.

What do I have to do?
2 REPLIES
JohnWRuffo
Honored Contributor

Re: Proliant 1600 upgrade

Jeff:

You need to set SW1 S1 to ON.

Here is the Maintenance and Service Guide:
http://h200001.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_179480-001_rev3_us/TPM_179480-001_rev3_us.pdf
Look on page 134
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
jeff Branfield
Occasional Visitor

Re: Proliant 1600 upgrade

Thanks for the advice. I have put the switch to on (disable) but the server still refuses to boot. Is there anything else that needs doing