cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 1600R

 
Tommy Stromberg
Occasional Visitor

Proliant 1600R

Hi
i´m seeking info about an Proliant 1600/500( 500 MHz, 768 MB RAM ,scsi x 4 9,1 GB) it has 4 scsi drives, but it does´nt boot, the screen is black, my question is, if it is possible to boot it from a IDE drive. I also need to know if i can put an additional CPU in it I have a P-III 500 MHz.
thank you for any info
2 REPLIES
Mark Morgan
Regular Advisor

Re: Proliant 1600R

You will have to use Compaq part number parts. CPU's, memory, etc.

Try this URL:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=179911&taskId=101&prodTypeId=15351&prodSeriesId=254906

Since you have no video someone may have disabled it. These servers had a diagram of the system inside the cover or case panels. Grab a torque screw driver and unplug the system. Remove the top two screws which look like thumb type. Slide the cover off and you should find the system diagram.
You mentioned 768 ram, do they have part numbers ending with a -001 or -003. This is a good way to identify correct parts. Since it is old you can check eBay for parts.
These servers run great.

Good Luck, Tommy

Sincerely, Mark
Tommy Stromberg
Occasional Visitor

Re: Proliant 1600R

Thanks Mark

Very useful information.

I´ll continue working with my server.

again thanks