HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 1850r

 
John M._3
Occasional Contributor

Proliant 1850r

My proliant 1850r won't boot. When I power on the system I get no drives spinning and no video. The controller lights display but that's it. No video, no hard drives lights are not showing or spinning. Server will not boot. Only the CDROM drive LED is blinking. Any suggestions
1 REPLY
HGN
Honored Contributor

Re: Proliant 1850r

Hi

Steps to research the problem
1.Bring the system down to minimum configuration (Motherboard ,min RAM for load purpose CD Drive
2.Still no display the issue might be with either power supply or the motherboard
3.If display comes try to add 1 by 1 hardware.
4.In minimum config if there is no display try to swap the memory module to make sure you get a display.

In this case after doing all the above you need to call it in to HP .

Rgds

HGN