Proliant 2000 P5/90 drive array problem

[Sebastian Borcea]

I have a Proliant 2000 P5/90 server and at a reboot it dosen`t work.
It give me a message :
175-EISA Configuration/Slot mismatch
Device found
174-EISA Configuration/Slot mismatch
Device not found
Slot 7 Drive Array Initializing
1785-Slot 7 Drive Array not configured
179-System revision mismatch

[Prashant (I am Back) · Accepted solution]

hi,

try to clear NVRAM old server i dont have exact information but must be switch banks on server check for side panel for further instruction to clear nvram/CMOS. Try to update the BIOS for same then check.
If you are trying to start server with bare minimum configuration.

Regards,
Prashant S.

[Sebastian Borcea]

I clear the NVRAM , and it do the same thing.
It not working.
Can somebody help me?

[Prashant (I am Back)]

Hi,

Which smart array are we using on same server what is the firmware version of the same. any inputs on the BIOS Version of the server.

Regards,
Prashant S.

[Sebastian Borcea]

Prashant Sharma,
I don`t understand what you are telling to me.
Since I clear the NVRAM, it give it to me another message regarding incorrect NVRAM configuration.
The Smart Array controler is an big one on EISA connector.

Wait for your answer.

Sebastian