HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 2500 - Compaq Smart array 3200 controller

 
Davide_40
Occasional Visitor

Proliant 2500 - Compaq Smart array 3200 controller

Hi, i'have a problem with this server.
I have installed the compaq smart array 3200 controller, but don't boot server, with this error
1702-SCSI cable error detected, system board, system halted
I have reset switch num 6 in the board, but the system boot only if cable is connett on the internal controller.
Please help me!!!
I'm italian, and i preferred italian support....but anyone is accepted ;-)
Best regard, and tank's
2 REPLIES
Stephen Kebbell
Honored Contributor

Re: Proliant 2500 - Compaq Smart array 3200 controller

Hello,

you need to connect a cable with a terminator to the internal controller. The PL2500 onboard SCSI controller does not auto-terminate if there is no cable connected.

I remember because it was one of the first calls I ever had about servers when I used to work for Compaq Tech support!

Regards,
Stephen
Davide_40
Occasional Visitor

Re: Proliant 2500 - Compaq Smart array 3200 controller

Very tank's, your solution it's ok!!!

I send you a big tank's from Italy.

Regards
Davide