HPE Community
ProLiant Servers (ML,DL,SL)
1752701 Members
6255 Online
108789 Solutions
New Discussion юеВ

Re: Proliant 2500

 
chella adisesh
Occasional Contributor

тАО09-23-2004 08:23 AM

тАО09-23-2004 08:23 AM

Proliant 2500

Have smart 2dh array controller card and a embedded SCsi port on the motherboard. I want to create an array between my 2 9.1 g hard-drives. How should i connecte my drive cage?
0 Kudos
Reply
2 REPLIES 2
JohnWRuffo
Honored Contributor

тАО09-24-2004 12:17 AM

тАО09-24-2004 12:17 AM

Re: Proliant 2500

Chella:

You need to disconnect the SCSI cable leading from your drive cage to the on-board controller and connect it to the SmartArray 2DH Controller. The same cable should be used.

You will then need the Array Configuration Utility from your SmartStart CD to configure the array.

If you do not have a SmartStart CD, you can use the diskette version of the ACU, here:
http://h18007.www1.hp.com/support/files/proworkstation/us/download/8605.html

Let me know if this does not help you? -john
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
JohnWRuffo
Honored Contributor

тАО09-24-2004 12:30 AM

тАО09-24-2004 12:30 AM

Re: Proliant 2500

Sorry for the double post, but you will need the 2DH controller driver for Windows once you have the array configured:

http://h18000.www1.hp.com/support/files/server/us/download/17322.html
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.