ProLiant Servers (ML,DL,SL)
1748140 Members
3516 Online
108758 Solutions
New Discussion юеВ

Proliant 3000 Power up failed

 
Stefan_27
New Member

Proliant 3000 Power up failed

Hello

I??ve got a Compaq Proliant 3000.
I??m not able to power up the server.
A green LED at rear on the power supply is coming up when the power cord is connected.
At the front the display is on ( Model I 56022 Firmware 1.9 ), but there is no reaction on the main switch!!

Any suggestions ?

Thanks
3 REPLIES 3
Leon Rosier
Respected Contributor

Re: Proliant 3000 Power up failed

Hi,

1. The Proliant 3000 has cover switches. The covers should be on the system. If that does not resolve the problem, try to figure out if these switches are functioning properly.

2. Do you see anything on your management display?

3. It takes a little while when you switch the machine on before the power led etc. go on.

Leon
Stefan_28
New Member

Re: Proliant 3000 Power up failed

Hello Leon

Thanks a lot, you were exactly right.
The Server is running now.

By the way, where to dl a new BIOS/Firmware and how to update the old one ?


Greetings
Leon Rosier
Respected Contributor

Re: Proliant 3000 Power up failed

Easy, go to this page:

http://h18007.www1.hp.com/support/files/server/us/locate/20_1112.html#4

Switch on your system and check what version your system is P09 or E39. DL the applicable file and run it. it creates a diskette. Cold boot from the diskette and hit enter when asked.

Leon