Proliant 3000 cpqarry2 did not respond event error

[Stefan Scott]

Hello,

I'm peroidically getting the following system event error:

\Device\Scsi\cpqarry21, did not respond within the timeout

Any suggestions?

[amhakassa]

Hi Stefan,

Usually time out period happens when the controllers did not respond to the Operating sytems disk access request which could be caused by a bad controller firmware or a bad controller or cable. Or It could be caused by a corrupted or bad driver of the controller for the operating system you are running.

My suggestion will be

1. Update the driver for the controller to what ever is latest
2. Update firmware on the controller to whatever is latest
Just incase u have the same ver driver or firmware, I would suggest still to reflash firmware and driver

here is the link where u can get all those things
http://h18023.www1.hp.com/support/files/server/us/family/model/1112.html?lang=en&cc=us

Choose your operating system under this link and you will see the firmware for the controller u have and also the driver

Good Luck
Amha Kassa