ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 3000 front LCD display configuration

Robert Spidle
Occasional Visitor

Proliant 3000 front LCD display configuration

Ok... I've been beating my head against this and hate to have to post this question, but how do I go about configuring the information on the front LCD display on a Proliant 3000?
1 REPLY
Prashant (I am Back)
Honored Contributor

Re: Proliant 3000 front LCD display configuration

Hi,

It is Integrated Management Display with Cable connected to server.

Integrated Management Display Panel
The Compaq Integrated Management Display (IMD) is an integrated, 16 x 4 character
display mounted on the front of the server. This display provides easy-to-use, menu-driven
access to server information.
To remove the IMD:
1. Open the front bezel door.
2. Remove the front fixed bezel.
3. Remove the front fans.
4. Remove the drive cage assembly.
5. Disconnect the IMD cable à from the IMD extension cable à connected to the
system I/O board.

Refer to service maneul of the Pl 3000

Prashant S.
Nothing is impossible