ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 3000 powers up, no boot.

John_481
Occasional Visitor

Proliant 3000 powers up, no boot.

I was wondering if anyone has seen this. I have a Proliant 3000. When I press the power button to turn the server on, the fans will come on and all lights will turn on but the monitor never turns on and there are no beeps. I've tried switching out the motherboard, CPU, played with the RAM and that doesn't seem to work. I do notice that the power supply does have a yellow light in the back, but I'm not sure if it's supposed to be lit to indicate not to remove the power supply. Perhaps it could mean that something is wrong with the power supply itself. Any help would be appreciated.
4 REPLIES
Claude Boileau
Valued Contributor

Re: Proliant 3000 powers up, no boot.

Hi John

You will need to replace the power supply.

regards
Caesar_3
Esteemed Contributor

Re: Proliant 3000 powers up, no boot.

Hello!

Yes it's problem with power supply,
you need to replace it with a new one.

Caesar

Re: Proliant 3000 powers up, no boot.

John,
I do have the same problem now.
Was it the problem of power supply??
Please let me know if you solved this issue.

Regards,
Karthik
herb_4
Advisor

Re: Proliant 3000 powers up, no boot.

u have a dip switch that turns on and off the onboard video have u tried it, located by the processor 2 by the corner of the board.