cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 3000

Michael Lee_18
Occasional Visitor

Proliant 3000

After put in new 4GB memory to Proliant 3000 Server , The Server does not boot up. Need Help
3 REPLIES
JohnWRuffo
Honored Contributor

Re: Proliant 3000

The 3000 series servers had a few diferent models... can you tell us what the processor speed is or, if you know the model... what is it?

Lets make sure you have the right memory installed though... you should have 8 x 512MB which should fill the memory banks.
Make sure that each DIMM is firmly seated in its bank.

Does the server POST? Does it give you any video or does it issue any beeps? If you have POST, what error message does it give?
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
JohnWRuffo
Honored Contributor

Re: Proliant 3000

Sorry for the double post... What O/S is installed? Windows/Solaris/SCO?

Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
Prashant (I am Back)
Honored Contributor

Re: Proliant 3000

Hi,

Are you using the correct memory check part no infomraiton from the respective site.
http://h18000.www1.hp.com/products/quickspecs/10041_na/10041_na.HTML

Try to boot server with minimum memory infomraiton.

Regards,
Prashant S.


Nothing is impossible