ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 310 G2: can't build a raid 1

darez41
Occasional Visitor

Proliant 310 G2: can't build a raid 1

Hi at all,

I have a problem with a HP Proliant 310 G2.
When I start ARRAY CONFIGURATION UTILITY, I see one HD in my list and not 2 hdd.

So i can't build the Array :-)

When the bios start, i see 2 hdd in my configuration. 2 Maxtor on the same PORT.

Why I see only 1 hdd ???
I need to build a RAID 1 array ...

Darez
7 REPLIES
Prashant (I am Back)
Honored Contributor

Re: Proliant 310 G2: can't build a raid 1

Hi,

Few Q's
Which SA controller ?
Is drives from HP only?
What is led status on drives?
Is there any error messages under IML?

Regards,
Prashant S.
Nothing is impossible
darez41
Occasional Visitor

Re: Proliant 310 G2: can't build a raid 1

>Which SA controller ?

INTEL 82801

>Is drives from HP only?

Yes, I have order all device from HP.

> What is led status on drives?
wait for this answer...

> Is there any error messages under IML?
no.


Actually I have open the CASE:
i have only configured in the last year a DESKTOP PC ... uhmmm ... but I see only one
HDD in my CASE :-)

I think that is little bit difficult to build a RAID 1 with 1 hdd ^_^

I have try to find the HDD in all part of the case ... i see only one HDD ^_^

There are normal behaviur that HP send my a server Proliant with 1 HDD when i have request 2 hdd ??????????


Darez
darez41
Occasional Visitor

Re: Proliant 310 G2: can't build a raid 1

I see:

"1 JBOD DEVICE(s) FOUND"

so i have 1 HDD ?

darez
Prashant (I am Back)
Honored Contributor

Re: Proliant 310 G2: can't build a raid 1

Hi,

Are you sure about Smart Array

and

Server come with
Storage Controllers
Single Channel Ultra320 SCSI Adapter (SCSI Models)
OR
Integrated four Channel SATA Adapter with Integrated ATA RAID 0, 1 (SATA Models)

which one we are talking about
SCSI OR SATA.

Nothing is impossible
darez41
Occasional Visitor

Re: Proliant 310 G2: can't build a raid 1

Integrated four Channel SATA Adapter with Integrated ATA RAID 0, 1 (SATA Models) :-)

But inside the case I see 1 Hdd, I think that i need to insert the second hdd in second SLOT.



Darez
Prashant (I am Back)
Honored Contributor

Re: Proliant 310 G2: can't build a raid 1

Hi,

This is cable layout.

Regards,
Prashant S
Nothing is impossible
Raul_57
Occasional Advisor

Re: Proliant 310 G2: can't build a raid 1

Hi, you must be activate the RAID controler on the proliant setup, is there some extended option and you can activate It.

The server have two concrtoller:

1) Intel 6300xxx/82802FR (Normal IDE controller).

2) Adaptec SATA RAID controller.

Normally the server works with the 1st controller.