ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 380 G3 fails rebuilting

Angelos Georgiades
Occasional Contributor

Proliant 380 G3 fails rebuilting

A customer has a Proliant DL380 G3 with 3 disks in Raid 5. One disk has failed and was replaced. The HD light started flashing and was suposesly rebuilting. Then a week later it has not rebuilted and all LED's on the 72.8GB SCSI HD are off. The disk was replaced again and after 1 day of rebuilting the same thing happed again. Any suggestions ?
1 REPLY

Re: Proliant 380 G3 fails rebuilting

Hi,

You Have to check ADU Report & System Insight Manager. Similar kind of issue I have faced where's Finally i found that one more Hard Drive was in predictive failure condition. That case I Have taken complete System backup and Recreated array & restored everything.
Simultaneous two hard drive failure causes the termination of the rebuilding process.

Thanks & Regards
Edwin P