Proliant 380G2 Network teaming

[Ian Fraser_3]

Anyone come across the following error and managed to fix it?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
HP Network Configuration Utility v 8.00.0.46

Cisco Fast Etherchannel Team
HP NC3163 FE NIC Port 1 Slot 0 Bus 0
HP NC3134 FE NIC Port 1 Slot 3 Bus 8

Switch Assisted LB with Fault Tolerance (SLB)
Balanced on Dest IP Address


Each of the errors appear twice.

CPQTeamMP
Event ID: 323
PROBLEM: A Team Member was NOT successfully added to the Team as configured. If at least one Team Member is configured in the Team, the Team will initialize (but with a lesser complement of Team Members). ACTION: Rerun the HP Network Teaming and Configuration utility to reconfigure the Team and Team Members.

"""""""""""""""""""
CPQTeamMP
Event ID 454
TEAM0: A team member does not support multiple mac addresses. Disabling Active Path.

[Scott F. Gunelius · Accepted solution]

Silly question, but are your ports on the switch configured to support FEC? I seem to recall needing our topology folks to do this so I could "trunk" multiple network connections using NIC Teaming.

[Paul_594]

Have you tried making the team as a fault tolerant team to ensure that it's not a problem with the teaming driver?

Also when using etherchannel on a server make sure your not running something like LACP over the connection, if so it wont work.

[Ian Fraser_3]

I will check with my customer and find out on both accounts , thanks for the help, I will post to let you know how I get on.