ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 400 SmartStart/System Erase not working

Chris A. Lutz
Occasional Visitor

Proliant 400 SmartStart/System Erase not working

I have a Proliant 400 (400MHz) I would like to re-install the OS. When I boot with the SmartStart CD-ROM, it states that the system or some of the components have been previously configured. When I the select "Run System Erase Utility", after a warning and a boot cycle, the message "This version should be run from SmartStart Only!" is displayed.

I also tried with the System Erase Disk. Then I get the "162-System Options Not Set", but SmartStart gives the same behaviour.

If I start the WinNT setup manually and provide the SCSI Controller driver, the setup accepts it but does not "see" any HDDs attached to it (the disk is there, I can access it in DOS mode)
1 REPLY
Winner Viagularaj
Occasional Visitor

Re: Proliant 400 SmartStart/System Erase not working

Pls update the server ROMPaq to version 4.06 A
http://h18000.www1.hp.com/support/files/server/us/download/7555.html