HPE Community
ProLiant Servers (ML,DL,SL)
1752790 Members
6019 Online
108789 Solutions
New Discussion

Re: Proliant 5500 and USB2

 
Paul Jordan
Occasional Contributor

‎06-05-2003 09:14 AM

‎06-05-2003 09:14 AM

Proliant 5500 and USB2

I have a PL5500, with a belkin USB2 card ,with an Iomega 120GB ext HDD hanging from it.The problem is, when the server is rebooted , the Iomega drive is not detected, the drive needs to be power cycled, then the ext drive is picked up and installed as new hardware. The drive mappings are lost and have to be remapped. has anyone come across this problem? is it a compatibility problem between 5500 and USB card??? Any help greatly appreciated.
0 Kudos
Reply
1 REPLY 1
Sunil Jerath
Honored Contributor

‎06-05-2003 08:55 PM

‎06-05-2003 08:55 PM

Re: Proliant 5500 and USB2

Hello Paul,
Please make sure that the system bios is uptodate and you have the lates system configuration utility run on the system. You can download the System configuration Utility from the following link:
http://h18007.www1.hp.com/support/files/server/us/download/13227.html
If that does not help then it's definitely a compatibility issue.

Regards,
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.