ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 5500 with SmartAray 4200 - Accellator Batteries Charge low

Proliant 5500 with SmartAray 4200 - Accellator Batteries Charge low

It show Smart Aray was temporary terminate coz Accellator charge low, how can i solve this problem
6 REPLIES
Sunil Jerath
Honored Contributor

Re: Proliant 5500 with SmartAray 4200 - Accellator Batteries Charge low

Hello,
Just let the battery charge for atleast 24 hours and it should be alright.

Regards,

Re: Proliant 5500 with SmartAray 4200 - Accellator Batteries Charge low

I have power on it for whole night but this morning i found it still return error 1794
Sunil Jerath
Honored Contributor

Re: Proliant 5500 with SmartAray 4200 - Accellator Batteries Charge low

Hello,
Per the users guide, it may take up to 36 power-on hours to recharge the accelerator batteries.

If the batteries are NOT recharged within that time frame the accelerator or controller need to be replaced.

Regards,

Re: Proliant 5500 with SmartAray 4200 - Accellator Batteries Charge low

So if i power on for 36 hours and still not work , i have to change the card or just small card attach with array card
Sunil Jerath
Honored Contributor

Re: Proliant 5500 with SmartAray 4200 - Accellator Batteries Charge low

Hello,
Unfortunately, Array Accelerator Module board is NOT spared separately, replacing the whole controller is needed.

Regards,

Re: Proliant 5500 with SmartAray 4200 - Accellator Batteries Charge low

Ok let try it first, if need to change i will i will move the HDD to another server, coz it is old and should retired. Thank you for you recommand