cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 5500

SOLVED
Go to solution
Andrew Burns_2
Occasional Contributor

Proliant 5500

Hello I have a Compaq Proliant 5500 Server with 2 500MHZ xeon processors. My question is I know the server will hold up to 4 processors but what is the biggest processors I can upgrade to?

The second question is I have the redundant memory is there any way i can turn off the redundancy on the memory so I can have 2 gig of mem instead of 1.

Thank you in advance

Sincerely,
ANdrew Burns
3 REPLIES
Sunil Jerath
Honored Contributor
Solution

Re: Proliant 5500

Hello Andrew,
In PL5500 tops you can go is 550 MHZ. Here is the option part information:

550MHz / 2MB L2 Cache w/ Heat /Sink and Processor Power Module - 155224-B21.

As for as the redundant memory is concerned I am not aware that PL5500 has the redundant memory. I know some of the newer Servers do. Anyways I shall try to attach the Service/Maintenance guide for you since I could not find any reference to the redundant RAM. Please send me an email at sunil.jerath@hp.com to get the Service guide since the attachment was too big to post on the forum.

Regards,

Regards,
Andrew Burns_2
Occasional Contributor

Re: Proliant 5500

Thank you so much you were so helpful.
Sunil Jerath
Honored Contributor

Re: Proliant 5500

Hello Andrew,
I have emailed you a Setup and Installation as well as the troubleshooting guide. Please let me know if I could be of any further assistance.

Regards,