ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Proliant 7000 LCD Panel Errors !!!!

Go to solution
Robert Amarena
Occasional Contributor

Proliant 7000 LCD Panel Errors !!!!


Iam new to this Forum. I have 3 Proliant 7000 which is out of warranty and recieving these errors:

LCD Panel shows the message:

Reset Detected


Reset Limit

Servers have been recently redone with SmartStart 5.4, Windows 2000 Advanced Server with Raid 5.
Bios and Array Controller have also been updated to latest version.

I cannot seem to find Specific Errors on this, any help would be much appreciated.


Robert R. Amarena, MCSE 2000, MCSA
Senior Systems Administrator
HealtheWare Development
Development Services Group
The Trizetto Group, Inc.
Union, NJ 07083
Voice:(908) 994-3283
Fax:(908) 994-4283

Martin Breidenbach
Honored Contributor

Re: Proliant 7000 LCD Panel Errors !!!!

ASR means Automatic Server Recovery.

There's ASR hardware on the system board. The ASR OS agent triggers this hardware which starts to count down. After some time the ASR agent resets the counter before it reaches zero. If the OS crashes then the ASR agent is no longer running, the counter reaches zero and the ASR hardware restarts the server.

So usually ASR resets happen after OS hangs or blue screens. But there can also be faulty ASR hardware (I've seen that once happen with a HP NetServer LH).

Check the integrated management log (via integrated management log viewer application or Insight Manager); there should be more info.

You can disable ASR in system setup.