ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 7000 support

Jorge_70
Occasional Visitor

Proliant 7000 support

Is it possible to install the OS(Windows or LINUX) from a CDROM connected to an additional SCSI Controller, instead of using the onboard controller, due to failures in the integrated controller or is it neccesary to replace the motherboard?
2 REPLIES
Prashant (I am Back)
Honored Contributor

Re: Proliant 7000 support

Hi,

It is very much possible use one of the following controller and help your self out.

Storage Controllers
Description Option Part#
Wide-Ultra SCSI-3 Controller (Retired 14 November 1999) 272514-001
64-bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter 9 154457-B21
64-bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter (Japan) 9 154457-291
64-bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter 10 129803-B21
64-bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter (Japan) 10 129803-291
64-bit Dual Channel Wide Ultra2 SCSI Adapter (Retired 14 November 1999)11 348757-B21 (Discontinued)
64-bit Dual Channel Wide Ultra2 SCSI Adapter (Japan)11 348757-291
64-bit/66-MHz Fibre Channel Host Adapter 120186-B21
64-bit/66-MHz Fibre Channel Host Adapter (Japan) 120186-291
Smart Array 221 Controller (Retired 31 December 2001) 388099-B21
Smart Array 221 Controller (Japan) 388099-291
Smart Array 3100ES Controller (with Software Redundancy Upgrade) (Retired 16 October 2000) 295570-B21
Smart Array 3100ES Controller (with Software Redundancy Upgrade) (Japan) 295570-291
Smart Array Software Upgrade with 3100ES Redundancy 386786-B21
Smart Array 3200 Controller (Retired 30 August 2001) 295643-B21
Smart Array 3200 Controller (Japan) 295643-291
Smart Array 4200 Controller (Retired 30 September 2001) 295636-B21
Smart Array 4200 Controller (Japan) 295636-291
Smart Array 4250ES Controller 295635-B21
Smart Array 4250ES Controller (Japan) 295635-291
Smart Array 431 Controller 127695-B21
Smart Array 431 Controller (Japan) 127695-291

Regards,
Prashant S.
Nothing is impossible
kcpant
Trusted Contributor

Re: Proliant 7000 support

hi,
for booting from an additional SCSI controller, you have to change the boot controller order & boot devices order in setup.

regards
PreSales Specialist