ProLiant Servers (ML,DL,SL)
1748129 Members
3689 Online
108758 Solutions
New Discussion юеВ

Proliant 800 6/200 & Windows 2000 installation problem

 
Alberto Alletto
Occasional Advisor

Proliant 800 6/200 & Windows 2000 installation problem

Hi,
i have a problem when installing windows 2000 (professional or server).
When i can selec a partition, create or delete,
there is this information:

0MB DISK 0 at Id 0 on bus 0 on symc8xx

When i press enter the next screen is a blue screen:

*** STOP: 0x0000001E (0x00000005, 0xBFFC0BC, 0x00000000, 0x639CB608)
KMODE_EXCEPITION_NOT_HANDLED

*** Address BFFC08BC base at BFFA2000, DateStamp 38441c2a Setupdd.sys

If this first time ....etc etc...

I have dowloaded a driver cp003193 and create diskette.
I have loaded a driver in windows 2000 during the installation (F6) ...but i have the same problem..

Before windows 2000 had windows Nt server and it work fine..

Alberto.
(sorry for my bud english)
3 REPLIES 3
Gary Antonio Benavides
Trusted Contributor

Re: Proliant 800 6/200 & Windows 2000 installation problem

Alberto Alletto
Occasional Advisor

Re: Proliant 800 6/200 & Windows 2000 installation problem

I don't know....
The chip in the controller is SYMBIOS 53C875J...
It have internal bus scsi for hd and tape, and external port scsi in the rear of pc..

This info are useful ?

Alberto
Alberto Alletto
Occasional Advisor

Re: Proliant 800 6/200 & Windows 2000 installation problem

The cp003193 is for ULTRA WIDE SCSCI 2 controller...my pc is old... i think that controller is ULTRA WIDE SCSI only...
What's a correct driver??

Help me please...