HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 800 6/350e

 
SOLVED
Go to solution
Brad Peer
Occasional Advisor

Proliant 800 6/350e

This server has been our Citrix server for several years. (NT 4.0 TSE) My plan was to upgrade to dual processors and Windows 2000 and put it back into service as our Citrix server. I purchased new PIII 500 processors (I picked them from the HP parts store thinking I would not run into a wrong parts problem.) Now I see that I need a processor power module for the second processor and I don't seem to be able to set the system processor speed to 500Mhz. It seems that I've botched it. What are my options from here?
7 REPLIES
Roger Faucher
Honored Contributor
Solution

Re: Proliant 800 6/350e

Brad:

Consider installing the latest BIOS (P14?) and firmware(s) from here:

http://h18023.www1.hp.com/support/files/server/us/locate/7_1131.html
While you're there check for any newer drivers/software (for later).

This manual shows the location and settings for the Bus/Core ratio settings:
http://h200002.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_313656-001_ch4/TPM_313656-001_ch4.pdf

Make a great day!

Roger


Make a great day!

Roger
Brad Peer
Occasional Advisor

Re: Proliant 800 6/350e

Thank you! This was exactly what I needed. Appearently, I need a Processor Power Module for the second processor. I see that there are two options to choose from. How do I know which is the correct PPM?

Brad
Roger Faucher
Honored Contributor

Re: Proliant 800 6/350e

Brad:

I don't know definitively. I'd be inclined to use the part number information from the existing PPM.

HTH

Make a great day!

Roger
Make a great day!

Roger
Brad Peer
Occasional Advisor

Re: Proliant 800 6/350e

Thank you for your help.

Brad
Roger Faucher
Honored Contributor

Re: Proliant 800 6/350e

Brad:

Please take a moment to read about the point system used in these forums. Thanks!

http://forums1.itrc.hp.com/service/forums/helptips.do?#28

Make a great day!

Roger
Make a great day!

Roger
Brad Peer
Occasional Advisor

Re: Proliant 800 6/350e

Sorry, I missed the button - submit points.
Roger Faucher
Honored Contributor

Re: Proliant 800 6/350e

Brad:

Thanks a lot!

Roger
Make a great day!

Roger