HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 800 SCSI Drives

 
Anthony P Fiore Jr
Occasional Contributor

Proliant 800 SCSI Drives

I have a retired Proliant 800 server I am setting up as a test server. I have run Smart Start and wiped out the drives, however I can not figure out how to view/change the hard drive configuration. It has two 9.1GB SCSI Drives on one cable attached to the motherboard. Where do I go from here?

Thank you, Tony
1 REPLY
Sumesh Pahuja
Occasional Advisor

Re: Proliant 800 SCSI Drives

Hi Tony,

Download the Storage controller Driver for the Proliant OS for the repective OS and install the OS manually.You may specify the Partition size during the OS installation.

Driver Location:

http://h18023.www1.hp.com/support/files/server/us/family/model/1131.html?lang=en&cc=us

Alternatively,you may also do an assisted installation for your OS using Smart Start version 5.5 or below.

SP