ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 800 - incorrect slot

Brian_368
Occasional Visitor

Proliant 800 - incorrect slot

I have a problem with my proliant 800 server, at startup i get the message "processer in incorrect slot - system haltet" it is a dual board, i have tried to build in 2 cpu's, but i still get the same message, can anyone help me with a solution?
2 REPLIES
JohnWRuffo
Honored Contributor

Re: Proliant 800 - incorrect slot

Brian:

Did you install a Processor Power Module (a.k.a., VRM) for each processor?

Did you re-run the System Configuration Utility after the installation of the new processor?
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
Brian_368
Occasional Visitor

Re: Proliant 800 - incorrect slot

Yes i have tried both of them, nothing works. but I just found a way to get on. If i cut the power about 1 hour, i will then get a normal start. But than again, if i have to reboot, it takes about 1 hour with no power, it can save me, but i it is not a solution.