ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant BLp20 Interconnect Switch

BEN LOPEZ_1
Occasional Visitor

Proliant BLp20 Interconnect Switch

Can anyone please help with the config of a ProLiant BL p-Class C-GbE2 Interconnect Switch and a Cisco 4507 Chassis.

I am trying to trunk between the Cisco Chassis and the switch which looks to have been succesfull as i can create VLan's and see VLan traffic between the two but no IP. If i attach a laptop to the BL Switch and assign a static ip address in the relevant VLAN then i cannot get any information between the two devices.

Any help appreciated

Thanks
2 REPLIES
Yariv Haguel
Occasional Visitor

Re: Proliant BLp20 Interconnect Switch

Have you solved the problem ?
I have configured blade's interconnect switch to cisco using 802.1Q.
at one side NIC 1 & 2 work just fine.
but at the other side theres a connection only to iLO. not to NIC 3.


Yariv Haguel
yariv@one1sys.co.il
Jeff Allen_5
Valued Contributor

Re: Proliant BLp20 Interconnect Switch

The GbE2 switches do not support VTP so you have to create the vlans on BOTH sides. Also, you need to tag the ports that connect the GbE2 to the 4507.