ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL 380 G2 Problem

Juan Ortiz_1
Occasional Visitor

Proliant DL 380 G2 Problem

In the evertviewer i have this error:

"The device, \Device\Scsi\cpqcissm1, did not respond within the timeout period.

May you help me pls
4 REPLIES
Torsten.
Acclaimed Contributor

Re: Proliant DL 380 G2 Problem

Hi Juan,

have a look at this:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=203178

HTH!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Terry Hutchings
Honored Contributor

Re: Proliant DL 380 G2 Problem

This error is coming from the array controller (likely 5i).

The first thing I would recommend in this case is to make sure the latest driver is installed. It's also possible there is a problem with either the cabling or backplane.
The truth is out there, but I forgot the URL..
Oleg Koroz
Honored Contributor

Re: Proliant DL 380 G2 Problem

Kent Chen_2
Occasional Visitor

Re: Proliant DL 380 G2 Problem

I have seen this error before and the culprit is the scsi hdd, you may want to check out the hdd itself.