ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL 380 G2 won't boot to Windows after power failure

kvs27
Occasional Visitor

Proliant DL 380 G2 won't boot to Windows after power failure

We had a power failure last night and our server will not boot into the OS, server 2000. It states "non-system disk or disk error"... no floppy or CD in the drives.... array 5i with 6 18.2 GB drives, indicate OK on the array manager in the BIOS.... replaced drive 5 2 weeks ago due to a failure, and server had been running fine since. Tried to do a repair of server 2000 with CD and repair console, but states "setup has determined that your computer's startup hard disk is new or has been erased, or that your computer is running an OS that is incompatible with Windows 2000".. anyone seen this one?
1 REPLY
juan quesada
Respected Contributor

Re: Proliant DL 380 G2 won't boot to Windows after power failure

hi,

storage sub system failed.
Please boot from SSCD and run ADU report, attach it to this thread

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=MTX-a0cacdec34c24b288772ed3d88&jumpid=reg_R1002_USEN

Regards