Proliant DL 380e G8 RAID 1+0

[TMTL]

Hello everyone, I could use some experience help. I have bought a HP P/N 641552-001 300g HD for this server and the new HD won't rebuild my RAID 1. I have read online that I should be able to hot swap and so I did. The drive, when done, show an all amber solid light.

I can not attached jpegs of what shows in iLO 4. the system board model lists HP DynamicSmart Array B120i. Controller on Slot 2 HP Smart Array p420 controller. It is the second HD that went bad. iLO 4 shows

Any help would be appreciated,

[Torsten.]

Are the disks connected to the B120i or the P420?

[TMTL]

Is there a another way of inserting a picture into this box other than available insert/edit image? My screenshots don't appear. I show in iLO 4 Controller on Slot 2 P420.

[Torsten.]

Click on the camera symbol (Insert Photos), then click on "Choose Files" and upload your pictures.

Just in case the disk is connected to the B120i you probably need a reboot now and answer the question about the rebuild.

[TMTL]

[TMTL]

Camera icon is greyed out and when I click a window opens requiring me to provide path to images, title, screen resolution of images. No image is entered into this area.

[TMTL]

[Adrian_Wąs]

Use service to sharing a photo, like this: https://imgbb.com/
After update photo, copy link of updated photo and paste in greyed camera window

[TMTL]

Unfortunalety, I was a newbie on this account of the forums and could not post pictures. The imagese were with the new HD installed and it failed to rebuild the RAID 1. I have read online that firmware is important. So if the new drive has a newer firmware hpw I can verify and what (on the images) controller is port 1 | box 1 bay 2 which should be the new drive, controller/firmware is being used?

[Torsten.]

As you can see firmware is the same.

The disk is predictive failed, this means the S.M.A.R.T. counters are too high.

By the way, the ILO firmware is much too old.