Proliant DL120 G7

ZaiBo · ‎03-21-2016

Hi,

I have add new smart array 410i in this server. The smart array using old firmware. So i decided to upgrade using HP Service Pack Proliant.

After upgrade it show some error. I just ignore the error and reboot after upgrading. When i choose smart array controller to do confoguration, it initialize only. Then it seeking CDROM boot. It now showing any menu. How to fix it? Please advice.

Thanks.

Torsten. · ‎03-21-2016

Soem more details? Like a screenshot? Press F8 if you see the smart array output during post, select view logical drive.

>> After upgrade it show some error

This was the most important message ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

ZaiBo · ‎03-21-2016

How to press F8 if menu not appear? It's just show analysing and continue boot to cdrom. Before upgrade, i saw menu like press F8 and press F11 if not mistaken.

ZaiBo · ‎03-21-2016

Attach here is log after upgrade firmware using HP Server Pack Proliant. Hope this can be helped.

Torsten. · ‎03-22-2016

The second screenshot shows no controller detected. Either the controller or the slot is bad. Try another slot, if possible.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!