ProLiant Servers (ML,DL,SL)
1748235 Members
3476 Online
108759 Solutions
New Discussion юеВ

Re: Proliant DL20 Gen10 WoL

 
SOLVED
Go to solution
Tomasz1
Occasional Advisor

Proliant DL20 Gen10 WoL

Good Evening,
When I try to sent WoL packet to my Proliant DL20 Gen10 server (after system shutdown), nothing happens. I am using IP address of iLO and mac address of shared port. I want the server to be woken up after power recovery and the packet would be sent by SNMP card from UPS.
4 REPLIES 4
MV3
HPE Pro
Solution

Re: Proliant DL20 Gen10 WoL

HI There,

Good Day!

Please check if you have configured the below RBSU (BIOS) settings.

Prerequisite
A WOL-capable NIC, NIC driver, and operating system

Procedure
1. From the System Utilities screen, select
System Configuration > BIOS/Platform Configuration(RBSU) > System Options > Server Availability > Wake-On LAN.
2. Select setting - Enable > Save settings and check for the reported issue.

Cheers

I am an HPE employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Tomasz1
Occasional Advisor

Re: Proliant DL20 Gen10 WoL

Thanks. I guess the issue is that the server is Hyper-V enabled, and it blocks WoL
jeffreychausse
New Member

Re: Proliant DL20 Gen10 WoL

Hi,

I'm also having issues with Wake On LAN. I've checked the BIOS configuration as mentionned above and WOL is enabled.

I've also configured the NIC to enable WOL within Windows 10 Pro.

I'm used to work with WOL and I'm not sure where to look next...

Thanks in advance for the help!

mysy
Valued Contributor

Re: Proliant DL20 Gen10 WoL

HPE server have other way to control power that is iLO5 

just use visit iLo5 ip and MS edge browser to control power on or off the unit.