ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL20 Gen10 WoL

 
SOLVED
Go to solution
Tomasz1
Occasional Contributor

Proliant DL20 Gen10 WoL

Good Evening,
When I try to sent WoL packet to my Proliant DL20 Gen10 server (after system shutdown), nothing happens. I am using IP address of iLO and mac address of shared port. I want the server to be woken up after power recovery and the packet would be sent by SNMP card from UPS.
2 REPLIES 2
MV3
HPE Pro
Solution

Re: Proliant DL20 Gen10 WoL

HI There,

Good Day!

Please check if you have configured the below RBSU (BIOS) settings.

Prerequisite
A WOL-capable NIC, NIC driver, and operating system

Procedure
1. From the System Utilities screen, select
System Configuration > BIOS/Platform Configuration(RBSU) > System Options > Server Availability > Wake-On LAN.
2. Select setting - Enable > Save settings and check for the reported issue.

Cheers

I am an HPE employee
Accept or Kudo
Tomasz1
Occasional Contributor

Re: Proliant DL20 Gen10 WoL

Thanks. I guess the issue is that the server is Hyper-V enabled, and it blocks WoL