ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL320 with the sound"D.D.D...."

 
Teddy Wang
Occasional Contributor

Proliant DL320 with the sound"D.D.D...."

Dear All I meet a problem with Proliant DL320G2 with system firmware D13,Microsoft Windows 2000 professional. The machines always has the noise from system I/O board -Buzzer. There are about 6 DL320G2 with the problem, the other 54 DL320G2 are ok. The setting for all DL320G2 is the same. Is there any one meeting the similar problem?

3 REPLIES
Prashant (I am Back)
Honored Contributor

Re: Proliant DL320 with the sound"D.D.D...."

Hi,

Just try out following steps.
1 case
make switch 6 on then power on server that will clear configuration for nvram only.
do it without hdd (remove hdd when server is off)

2 case
S4 Enable floppy boot make it on
then enter bios floppy again from hp site
http://h18000.www1.hp.com/support/files/server/us/locate/20_4762.html

When do we get noise is there any errors on the iml on the server.

Regards,
Prashant S.
Nothing is impossible
Jerry Leinsing
Frequent Advisor

Re: Proliant DL320 with the sound"D.D.D...."

This has helped me a great deal in the past

http://pchell.com/hardware/beepcodes.shtml

Jerry Leinsing
Frequent Advisor

Re: Proliant DL320 with the sound"D.D.D...."